79633 Standpipe, Filter 9-3/4"

79633 Standpipe, Filter 9-3/4"

Hot Spring Spas

$31.57
(No reviews yet) Write a Review
SKU:
31390
Adding to cart… The item has been added

79633 Filter Standpipe 9-3/4" (REPLACES 31390)

This part is a replacement Standpipe Filter 9-3/4" for select Hot Spring hot tub models. The standpipe secures the filter in a vertical position.

The standpipe, located in the filter compartment, consist of a standpipe and cap. Compatible with a variety of the 1989 to current Hot Spring Highlife and Tiger River spa models.

Item Description Part #
1 Drain Wallfitting 3/4 Inch 35911
2 Wallfitting, Rear: Wallfitting #1 Rear 30490
3 O-ring: 0-ring 2.350inx.190in 30 Sil 30482
4a Wallfitting #1 Front 30488
4b Wallfitting, Grey W/O Knockout 71263
5a Standpipe Filter 9-3/4In 79633
5b Standpipe, W/Restrictor 76504
6 Filter, 65Sf Tri-X 9/Cs 73250
7a Standpipe,Cap 3-1/2,Hss,White 31389
7b Standpipe,Cap 3-1/2,Tr,Grey 36513
Removal
  1. Disconnect power to the spa.
  2. Access the filter compartment.
  3. Remove any debris or floating items from the filter compartment.
  4. Turn the standpipe cap (located on the top of the filter cartridge) counterclockwise until the standpipe cap can be removed.
  5. Remove the filter from the standpipe.
  6. Turn the standpipe counterclockwise until the standpipe can be removed.
    NOTE: If the filter wallfitting also turns, use a spanner wrench to hold the filter wallfitting.
  7. Reverse steps 1 to 6 to reinstall the standpipe.

STANDPIPE REMOVAL (2000 or later)

NOTE: The standpipe is glued into the wallfitting due to UL requirements.

  1. Disconnect power to the spa.
  2. Access the filter compartment.
  3. Remove any debris or floating items from the filter compartment.
  4. Turn the standpipe cap (located on the top of the filter cartridge) counterclockwise until the standpipe cap can be removed.
  5. Remove the filter from the standpipe.
  6. Using a spanner wrench, turn the standpipe wallfitting counterclockwise until the standpipe/wallfitting can be removed.
  7. Reverse steps 1 to 6 to reinstall the standpipe

Item Description P/N
1 Filter Lid *
2a Cap White 31389
2b Cap Grey 36513
3a Standpipe White 31390
3b Standpipe Ass gray/Restricto- Ace 76504
4 Filter **
5a Walfitting White 30488
5b Walfitting Grey 71263

6

7

O Ring

Walfitting Rear

30482

30490

Related Products

!