71510 Control Panel Bezel 1 Pump

71510 Control Panel Bezel 1 Pump

Hot Spring Spas

$159.89
(No reviews yet) Write a Review
SKU:
71510
Adding to cart… The item has been added

Control Panel Bezel 1 Pump

The control panel consists of the buttons that spa owner uses to regulate the light and thermostat, as well as operate the jet pump(s).

The control panel is attached to the spa by two screws. Compatible with a variety of the 1994 to 2010 Hot Spring Highlife spa models.

*No longer comes with the LED light.

Item Description Year Used Part #
1a Control Panel 1 Jet Pump 1998-2008 71510
1b Control Panel 2 Jet Pump 1998-2008 71509
2a Control Head 1998-2000 Discontinued, Use 73225 1998-2000 71920
2b Control Head 2001-2008 2001-2008 73225
3 Light Cover 1998-2008 37248
4 Screw 6-22 x 7/8 1998-2008 37265
* Control Panel Mounting Screw 1998-2008 37262
* Harness Led Backlight 1998-2008 37603
* Backlight HSS Control Panel 1998-2008 37611

* Non Illustrated Part

Removal
  1. Disconnect power to the spa.
  2. Carefully remove the dome light cover.
  3. Remove the two control panel mounting screws.
  4. Gently pull the control panel away from the spa only far enough to thread the panel back through the cutout and into the equipment compartment.
    Caution: The fiber optic cables (if applicable) can be damaged or become dislodged by excessive pulling on the control panel.
  5. Access the IQ 2000 control box.
  6. Disconnect and remove the control panel ribbon cable (if applicable).
  7. Separate the control head from the control panel.
  8. To reinstall the control panel, reverse steps 1 to 7.
!